Products | Bakery machine | Mixer | Dough Divider | Rounder | Oven | Your reliable partner in bakery

Convection Oven CM-404, CM-406(D), Proofer, CM-G305

CHANMAG Convection Oven CM-404, CM-406(D), Proofer, CM-G305 is mainly for baking croissants, Danishes, and puff pastry. The size makes it suitable for stores and labs where only small spaces are available. This oven can be heated by either electricity or gas. Steam devices can be added depending on need, and the oven can be combined with other small proofers and single-tray electric ovens to meet a variety of production needs without taking up space.

Technical Features: 1.Suitable products → croissant bread, puff, cream soup with puff pastry top, pizza, cheese cake, chicken leg, baking potato, hand-made cookies, curry cake, pepper cake, egg yolk shortcake, pineapple cake, baking meat, etc. 2.The machine body is made from stainless steel, easy to clean, small area occupied, to save room space. 3.Saving energy, high heating ability. As a special rock wool insulation material has good heat savings. 4.Special turbine type impeller blade and special air convection with even baking performance.

Details
Cutting Machine CM-SL609B Bagel Hamburger

CHANMAG CM-SL609B Bagel/Hamburger Cutting Machine is a good helpful machine for flat slice making convenient. It is a good helpful machine for cakes making convenient.

Technical Features: 1. Slice cakes, hamburger. Can also be a peeling machine by adding a pressing board. 2. Cutting thickness is adjustable for each 5 mm; Conveyor speed is adjustable. 3. The cutting surface is flat smooth without cake crumbs remain, to increase working efficiency. 4. Attached safety protection cover at the entry, and stop switches at the front and rear to improve operator safety.

Details
Desktop Dough Moulder CM-210

CHANMAG CM-210 desktop Dough Moulder is of the mini-desktops, suitable for bakery, baking laboratory use. Built the two sets modeling pressure roller, base on the modeling pressure need dough thickness can adjust spacing. Can to change modes for single pressed dough or pressed after modeling.

Technical Features 1.The Conveyor can be controlled reversing. 2.Scraper is adjustable, easy to clean. 3. When molding dough 150g or above, can be adjusted the under scraper to clear the roller and conveyor.

Details
Double Arm Mixer CM-D80

CHANMAG CM-D80 Double Arms Mixer can be used in the dough with 50%-70% percent of moisture content. The design of double arm, simulating of hand-kneading, can strengthen the good taste of dough and biting. With manual or automatic two function, and could be setting up low and high speed. The dough is easy to be removed out from Machine. The cover is set with safety measures, so the machine will immediately stop while the cover is opened.

Technical Features 1. The double arm mixers are indicated for any kind of dough produced in pastry shops and bakeries. 2. The machine can be easily located in the shop since their structures occupy little room. 3. Machine is with manual or automatic two functions, and could be setting up low and high speed. 4. Designed can be made according to site production line and working space.<

Details
Double Spiral Hooks Mixer CM-D240AD

CHANMAG Double Spiral Hooks Mixer CM-D240AD (Digital Panel) with removable bowl, suitable for toast, Bagels, Pizza, Baguette dough and other dough with a moisture content of 58~65%. The hydraulic system with removable bowl ensures to knead at short mixing duration, less consuming energy, rotational speed for making hygienic and finest quality dough, to meet the continuous mass production line application.

Technical Features: 1.The double spiral hooks design makes the mixing efficiency higher. The dough constructions remains well and reduce friction that dough keeps slowly heating up because of no middle rack. 2.Bowl with central cone which can enhance the dough extension and good homogenous dough quality. 3.With Hydraulic controlled systgem on positioning, to ensure the machine can operate in a stable and safety usage. 4.Digital panel can set maintenance time, mixing process settings, monitoring content of feedback abnormal information and overload, humanized operation, easy to clean and maintain management.

Community media link:

Details
Dough Moulder CM-246S

CHANMAG CM-246S Dough Moulder is of the mini-desktops, suitable for bakery, baking laboratory such as sweet bread, toast bread, cream bread, salad bread and other dough use. Built the two sets modeling pressure roller, base on the modeling pressure need dough thickness or the users’ demands can change modes for single pressed dough or roll the dough after molding. The model CM-246S is optional stainless steel version, to comply of local regulations for food hygiene and safety requirements.

Technical Features: 1.Especially for sticky dough which contains high percentage of water, sugar, margarine. 2.Cover can be opened for quick and easy cleaning & maintenance. 3.Equipped with wheels for convenient moving. 4.Powder box can be movable hand. 5.Adjustable in any directions for users’ preference
#DoughMoulder #MiniDoughMoulder #ToastDoughMoulder #BaguetteMoulder #BestDoughMoulder #BreadMoulder

Details
Dough Moulder Machine CM-F500B

CHANMAG CM-F500B Dough Moulder Machine made entirely of stainless steel is suitable for sheeting and rolling up pieces of dough weighing from 30~2500g, especially for French bread. The dough is rolled up by two wool sleeves. Machine safety is ensured by an infeed conveyor belt and the electrical interlock safeguard situated above the belt before the sheeting cylinders. The dough is rolled by the gauging cylinders to ensure uniform weight, as if it were done by hand.

Technical Feature 1. Dough Moulder machine is suitable for low moisture dough roll forming, such as rosong bread, croissant. 2. Made entirely of stainless steel body, easy to clean. 3. Can change the dough outlet, coordinate the operator direction. 4. Accordance with dough of different sizes, simultaneously up to two moulder dough.

Details
Dough Moulding Machine CM-750, CM-750TC

CHANMAG CM-750, CM-750TC Moulding Machine is suitable for all kinds of bread, from smallest to largest, especially for French bread. This machine is perfectly for making long loaf organization equally for each loaf. Mounted on a trolley, it can be supplied with a conveyor belt upon request. It also can be connected with the front-end production line equipment to perform the continuous production.

Note: CM-750TC is with conveyor working table.

Technical Features: 1. Distance between roller pitch and moulding belt is adjusted by pressure type knob. It is easy to operate and with accurate moulding result by user demands. 2. 3pcs rollers design: Entrance added third auxiliary roller makes dough feeding easily and even moulding quality. 3. Protective device design: When front guard has been opened during operation or the hopper of dough inlet is pressed by materials, machine will automatically stop operation. 4. Motor is designed with safety protective device. It will automatically stop running when machine is over loading in electricity. 5. Base structure is strong. The machine is stable and steady when it is running. 6. Machine base can be disassembled. It is easy to deliver without space occupied, with movable casters, easy to move machine anywhere.

Details
Dough Rolling Machine CM-535SD, 535SM

CHANMAG CM-535SD, CM-535SM Dough Rolling Machine is suitable for Russian bread and Steamed buns with low water content of the dough pressure of work. A whole large piece of dough can be repeatedly and pressed into a whole shape dough strip, suitable for use in bakery shops, production sites. The operator could set the number of repeated rolling demand, and then the machine will automatically output the whole dough when the work is finished, the automatic equipment can produce effectively.

Technical Features: 1.The machine with five rollers of two sets can fold and roll the dough automatically and continuously. 2.It sends out dough automatically after the rolling times finish and then it stops. 3.When rolling the dough, the sprinkler sweeps out flour smoothly and can be adjustable. 4.The automatic equipment can produce effectively. 5.Can be connected either the working table or dough cutting knife. It depends on the needs.

* CM-535SD Digital Panel: With handle for adjusting the dough thickness. you can set the number of automatic rolling and feeding out the dough, automatically adjust the distance between the rollers, and the rolling process data program of different products.

* CM-535SM Touch Panel: you can set the number of automatic rolling and feeding out the dough, automatically adjust the distance between the rollers, and the rolling process data program of different products.

#Dough Rolling Machine #Baguette Moulder #Best Dough Moulder

Details
Dough Rounder CM-1000RC

CHANMAG CM-1000RC Dough Rounder Conical Machine is a continuous type conical rounder for all kind of bakeries; suitable make rounding for dough weight 50 to 500 g/pcs; collocation with related production equipment, as a production line.

Technical Features: 1. The machine can be connected to the dough divider, to achieve all kinds of continuous production line needs. 2. Rollover track is processed with Teflon to avoid dough stuck to the track. 3. The operation of the machine and is easy to save labor, thus saving costs and increasing production efficiency and capacity.

Details
Dough Rounder CM-1000VRF

CHANMAG CM-1000VRF Dough Rounder is a very flexible cylindrical rounder for all kind of bakeries, suitable for all types of dough weight 30 to 500 g/pc; collaboration with related production equipment as a production line.

Technical Feature: 1. Capacity of up to 7000pcs per hour, production depending on the weight of different dough. 2. Operation panel easily accessible from both sides 3. Centrally adjustable rounding tracks. 4. Non-stick coated cone and tracks for better rounding, easy to clean.

Details
Dough Rounder CM-1200VR

CHANMAG CM-1200VR Dough Rounder (Cylindrical Rounder) is a very flexible cylindrical rounder for all kind of bakeries, suitable for all types of dough weight 30 to 500 g/pc; collaboration with related production equipment as a production line.

Technical Features 1. Capacity of up to 9000 pcs per hour, production depending on the weight of different dough. 2. Operation panel easily accessible from both sides. 3. Centrally adjustable rounding tracks. 4. Non-stick coated cone and tracks for better rounding, easy to clean.

Details
Dough Sheeter CM-450A/B, 520A/B/C, 650B/C

CHANMAG CM-450A, 450B, 520A, 520B, 520C, 650B, 650C Dough Sheeter is suitable for pressing and extending dough for Danish bread, pie, pizza, pastries, Portuguese egg tarts, Arabian breads and many other products. This machine is perfect for producing puff pastries. The dual-protection device provides safety for the operator. This high-performance dough sheeter, will be your excellent assistant. (Note: the A-Series are tabletop machines, B-Series are vertical type standing machines, and C-Series are vertical type standing machines with conveyor belt).

Optional: Blue conveyor belt (the blue conveyor belt is highly recognizable and prevents wear debris from contaminating the food.)

Technical Features: 1. As per the pastry formula, it is workable for pressing pastry thickness 1.2 mm - 38 mm. 2. Variable thickness adjustment for the pastry. To adjust thickness freely when pastry is under 38 mm. 3 .Both sides with safety guard for protecting the operator. 4. The conveyor belt is made of "PU + polyester" material. 5. It is workable for selecting Hand or Foot switch to operate machine running as per demand. It is available by customized for stainless steel machine structure as per demand.

Details
Electric Deck Oven (Digital Panel) CM-ECD204D~312D

CHANMAG Electric Deck Oven (Digital Panel) CM-ECD204D,206D,208D,CM-ECD306D,309D,312D is electronic Thermo-controller, the digital control panel can control the heat according to need and high precision, to enable temperature of oven chamber can keep the correct temperature, easy to handle, available with program mode, and to meet baking performance.

Technical Features: 1.Rubber seal oven door to avoid air leak. 2.Made of durable and sustainable strong structure thick steel sheet. No deformation from high temperature and heat pressure. 3.Electric Deck Oven with thick heat insulation layer to avoid energy waste. 4.The baking performance is very even on the surface.

Details
Electric Deck Oven CM-ECD102A~312A

CHANMAG Electric Deck Oven CM-ECD102A,103A,104A, CM-ECD204A,206A,208A, CM-ECD306A, 309A,312A, CM-ECD306AS with electronic thermo-controller, high precision, to enable temperature of oven chamber can keep the correct temperature, easy to handle, available with program mode, and to meet baking performance.

Technical Features 1.With electronic thermo-controller, high precision, to enable temperature of oven chamber can keep the correct temperature and to meet baking performance. 2.The oven door with rubber seal in order to avoid air leaking. 3.Oven is made from thicker steel sheet. The structure is very strong and with long life. It will not be transformed by high heating temperature. 4.With thick heat insulation layer in order to avoid energy waste. 5.The baking performance is very even on the surface.

Details
Electric Deck Oven CM-ECD408DFI

CHANMAG CM-ECD408DFI Electric Deck Oven is based on infrared rays heater tube, it is faster and easy cleaning and durability; front mounted panel for service and maintenance. Digital Panel is electronic thermo-controller, the digital control panel can control the heat according to need and high precision, to enable temperature of oven chamber can keep the correct temperature, easy to handle, available with program mode, and to meet baking performance. Technical Features 1. Up heater based on infrared rays heater tube, it is faster and penetrate ability of heat energy is stronger if compared with common electric deck oven. 2.Heated by infrared rays is able to bake the dough with higher expansion, with thin outer pastry, keeps product with better humidity, extends product shelf life and preserve limit. 3.Electronic thermo controller, with high accuracy, keeps baking chamber of oven with constant temperature, meets requirement of product baking. 4.Oven door with seal keeps well the oven temperature. 5.Oven body is made by thick steel sheet and strong structure for long operation life. There is no status over heated deformation caused by higher temperature from the oven. 6.Oven body with thick heat insulated foam layer to avoid losing of heat energy. 7.With even baking result, baking color on product surface is even. 8.Available for making other oven style to meet customer’s demand, apply for different size of baking tray, different baking layers and number of baking tray in each deck to meet different demands.

Details